Foseco Concreteing works

Not long ago we completed this civil works job at Foseco in Fazeley. The work was to create 3 concrete pads for the forklifts when unloading lorries

Firstly we saw cut the existing tarmac area to create a nice rectangular pad with a floor saw.  We then broke up the existing tarmac floor with a machine mounter breaker before removing it and storing to the side ready for disposal.  Once the tarmac was removed, we dug out to a depth of 400mm.

We then put 200mm of Type 1 Roadstone into the hole and compressed to create a nice firm base.  A layer of steel reinforcement mesh was then installed to give the new concrete some strength. We also installed a 10mm expansion joint around the edges.  200mm of concrete was then poured into the dug out areas and tampered level. This created 3 flat concrete pads.

The remainder of the Roadstone was used to fill in various pot holes and l level off an existing area.

All of the waste was collected and disposed of by a waste contractor with a grab wagon.